SOLARTRON METROLOGY

To Download Product Guides and documents please visit www.solartronmetrology.com.

orbit

Orbit® 3 Digital Gauging and Positioning Network

Introducing the Solartron Orbit® Network: A fully formed digital measurement system that makes it simple and easy to inter-connect high accuracy Solartron instruments, and other sensors to your computer, network, or PLC.

orbit1

Calibrated System

Each Solartron probe or instrument is available with a digital module at the end of the cable. Inside the module is a chip that digitizes the analog signal from the probe. The probe is actually calibrated and linearized at theSolartronfactory, with a guaranteed accuracy of 0.05% of range or 0.2 microns, whichever is greater, 0.15 micron repeatability, and 0.01 micron resolution. You can then master the probe anywhere over its measurement range, and attain the same accuracy from that master point. Solartron also offers a variety of calibrated non-contact Laser sensors available.

Connect to other Sensors
•    Analogue Interface Module (AIM): Connect to any sensor with a DC or 4-20mA output.
•    Encoder Input Module, (EIM): Connects with any rotary encoder or other device with a TTL output. With these connections, all readings can be sent to a PLC or PC seamlessly.
•    Digimatic Input Module: Connects to any Mitutoyo gauge
•    Digital Input/Output Module: An eight-pin module that acts as an I/O interface to a PLC.

orbit2

Interface to PLC, PC, or Readout

At the end of the module stack, you then connect an Interface module, available with a variety of outputs including USB, RS232 and Ethernet. Each connects with up to 150 modules! With the USB, you also attain dynamic speeds of up to 4000 readings per second, per module.

Via the interface module, you can then output any module reading to a computer, PLC, or network. For PC’s, Solartron offers free software drivers, which provide sample programs and coding to communicate with the probes via SPC program, Microsoft Excel, or other data tracking software. The drivers are Windows 7, 64-bit and XP compatible.

Solartron also offers a variety of Digital Readouts, including one, two, 16, and 31 channels. A Solartron Power Supply Interface Module is also required for a Orbit® 3 network stack, and will power up to 31 modules at once. They are available with both DC and AC inputs. With all its capabilities, the Solartron Orbit® 3 Network is the best solution for your gauging and measurement needs.

orbit3

argofile
 abrasive technology logo
 Capture
 wolf
 wendt
 vallorbe
strauss 
 k
 M.A. Ford
 logologo
 autowell-logo

 huf

895229 ec91a3b2ec834357a6eb7f4d0fb7d5bc 
 
Gesswein. The Right Tools

REEF DIAMOND TECHNIQUES

Director: Kurt Myburgh

Email:kurt@reefdiamond.co.za

Tel: +27 11 493 0991/1003

Fax: +27 11 493 9044

Physical Address:

45 Bossman Street

Ophirton

South Africa

Postal Address:

P O Box 82189

Southdale

2135

BELLEFIELD TOOLING

Director: Shane Myburgh

Email:shane@belltool.co.za

Tel: +27 011 493 8370

Fax: +27 11 493 9044

Physical Address:

45 Bossman Street

Ophirton

South Africa

Postal Address:

P O Box 82189

Southdale

2135

Go to top